Our membrane filter plates can meet the high efficiency of dehydration filter technology, which can achieve satisfactory filtering results, and can guarantee load operation of the filter press. Our membrane filter plates have the membrane plates embedded within the inside box of base plates, so as not to be pressed with tight pressure, the influence of which is called a replaceable type composite membrane of membrane plates. With fatigue resistance, anti-aging, sealed performance is good wait for a characteristic. The purpose of the production of membrane filter plates: at the end of the feeding process, based on the filter cake to squeeze, to enhance the efficiency of dewatering, rights and filter cake dryness, reduce pollution and reduce labor. The drying process can be avoided. Our membrane filter plates have good filter cake washing performance, and can be squeezed before and after pressing, increase operation, in order to further reduce the moisture content of filter cake and save washing water. Our membrane filter plates specifications for 2000 x 2500 mm, largest filtration pressure is 1.2 Mpa, complete specifications, can adapt to a variety of solid-liquid separation of the occasion.
Membrane Plates are used to reduce the cake moisture content or shorten the filtration cycle time. Two types of membrane plate designs are used; fixed and replaceable. Mixed pack membranes are the most common configuration -(one recessed plate then one membrane plate alternate in the press plate pack). The final product produces savings in the overall plate pack cost.
Membrane plates usually operate at a feed pressure of up to 7 bar and squeeze pressure to 15 bar. Special plates can be designed to accept higher feed and squeeze pressures.
1.Testing Pressure:27 MPa
2.Feeding Pressure:0.6 MPa
3.Material:Pure Reinforced PP
4.Cake Thickness:30 mm
5.Thickness of plates:50-70 mm
6.Flatness of plates:Lower than 25 micron
7.Feeding Hole:Central Feeding
8.Pressing Model: Hydrulic/Mechnical/Manual
9.Squeezing Methods: Double Squeezing
10.Size of plates:320/630/800/100/1250/1500/2000 mm
11.Feature 1:Lowest liquid content
12.Feature 2:Corrosin Resisting
