Filter Press for Sewage Treatment

How to use filter press to treat seawage? The Filter press in The treatment of The powder coating includes many contents, to The as degreasing, washing and adjustment of surface and phosphating. But The most important thing in these areas is spraying production line of plate and frame. Then we have to consider the skimmed purification of raw material liquid. About the processing of the workpiece and the transportation and storage caused by iron filings and flocculant and dust are able to achieve. Paint residue in the tooling widowhood and rust; And when workpiece is unqualified particles, produced by reverse engineering can be solved with this equipment. In the purification of liquid is the biggest advantage of the workpiece during processing will not cause damage to the quality, of course, also can meet during the nozzle spray system have the effect of purification and cleaning. In the use of the aperture at the time of 2 mm stainless steel wire can handle degreasing tank. Although these features are, but sometimes there will be a small particles, so long will appear during the running of jam phenomenon, so when using the need of constant maintenance and repair.

Main Structure of filter press for sewage treatment

Frame:                The steel frame acts as a clamping device for the filter plates.

Filter Plates:      A filter cake forms in the chambers between filter plates.

Filter Cloth:       A cloth filter that is attached to both sides of a filter plate. Solids build up on cloth to form a filter                              cake, separating liquids from solids.

Available options of filter press for sewage treatment

Closing mode:              manual, gear drive, hydraulic;

filter plate structure:    recessed plate, diaphragm squeeze (membrane) plate; plate &frame

filter plate material:      PP, rubber, cast iron, stainless steel;

Filter Plate size(mm):  320, 450, 630, 800,1000, 1250, 1500,2000

Technical specification of of filter press for sewage treatment